
Hardware Setup
SY-6ZE+
12
Step 3. SDRAM Memory Module Installation
Your board comes with two DIMM sockets, providing support for up
to 256MB of main memory using DIMM modules from 8MB to
128MB. For 66MHz front side bus CPUs use 12ns or faster memory;
for 100MHz front side bus CPUs use 8ns (100MHz, PC100
compliant) memory.
Memory Configuration Table
Number of Memory
Modules
DIMM 1
DIMM 2
1
1
st
2
1
st
2
nd
RAM Type
SDRAM
Memory Module Size
(MB)
8/16/32/64/128 Mbytes
Important:
It is of prime importance that you install DIMM modules
as outlined in the table above in order to preserve signal integrity on
100MHz front side bus systems.
Step 4. IDE Device Installation (HDD, CD-ROM)
This Motherboard offers two primary and secondary IDE device
connectors (IDE1, IDE2). It can support up to four high-speed HDD
or CD-ROM.
Connect one side of the 40-pin flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the Motherboard.
This Motherboard can support up to four HDDs.
Summary of Contents for SY-6ZE+
Page 67: ...64...