manualshive.com logo in svg

SOYO SY-6IWM, User Manual

Share
Download
SOYO SY-6IWM User Manual Download Page 21

Hardware Installation

SY-6IWM

17

Chapter 2 

HARDWARE INSTALLATION

Congratulations on your purchase of 

SY-6IWM

 Motherboard. You are about to

install and connect your new Motherboard.

Note:

 Do not unpack the Motherboard from its protective anti-static

packaging until you have made the following preparations.

2-1

 

PREPARATIONS

Gather and prepare all the following hardware equipment to complete the

installation successfully:

1.

 

Slot 1 processor with built-in CPU cooling fan.

Note:

 This Motherboard supports non-boxed type CPUs.

2.

 

DIMM memory module

3.

 

Computer case and chassis with adequate power supply unit

4.

 

Monitor

5.

 

PS/2 Keyboard

6.

 

Pointing Device (PS/2 mouse)

7.

 

Speaker(s) (optional)

8.

 

Disk Drives: HDD, CD-ROM, Floppy drive …

9.

 

External Peripherals: Printer, Plotter, and Modem (optional)

10.

 

Internal Peripherals: Modem and LAN cards (optional)

Summary of Contents for SY-6IWM

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands