SY-6BA+ IV
Quick Start Guide
11
Hardware Installation
Note on Over-clocking Capability
The SY-6BA+ IV provides over-clocking capability. Due to the over-clocking setting your
system may fail to boot up or hang during run time. Please perform the following steps to
recover your system from the abnormal situation :
1.
Turn off system power (If you use an ATX power supply, and depending on your system,
you may have to press the power button for more than 4 seconds to shut down the
system.)
2.
Set the JP8 to short if you use a FSB 66MHz CPU
3.
Press and hold down the <Insert> key while turning on the system power. Keep holding
down the <Insert> key until you see the message of the CPU type and frequency shown
on the screen.
4.
Press the <Del> key during the system diagnostic checks to enter the Award BIOS Setup
program.
5.
Select [SOYO COMBO SETUP] and move the cursor to the [CPU Frequency] field to set
the proper working frequency.
6.
Select [Save & Exit SETUP] and press <Enter> to save the new configuration to the
CMOS memory, and continue the boot sequence.
Note: SOYO does not guarantee system stability if the user over clocks the system.
Any malfunctions due to over-clocking are not covered by the warranty.
Summary of Contents for Motherboard SY-6BA+ IV
Page 27: ......
Page 28: ...Edition April 2000 Version 1 3 SY 6BA IV SERIAL ...
