SOYO LI-7000, User Manual, Page: 34 / 95

Motherboard’s Hardware Installation LI-7000
30
2. Power Button & Front Panel LED: JP15
(1). IDE LED
Attach the 2-pin IDE device LED cable to the corresponding IDE LED
header on the Motherboard. This will cause the LED to lighten when an
IDE (HDD, CD-ROM) device is active.
(2). ACPI LED
Connecting the 2-pin ACPI LED cable to the corresponding ACPI LED
header will cause the LED to light whenever the system is in ACPI mode.
The manufacturer has permanently set this Motherboard in ACPI mode
due to most hardware and software compliance to ACPI mode.
1
2
3
4
5 6
7
8
9
10
LED 0
VCC
IOSVSB
NC
NC
5VSB
SVS LED #
PWRBTN#LPC
IDEACT#
VCC
LAN LED
ACPI LED
Power Button
HDD LED
ACPI LED Pin Assignment
IO SVSB SVS LED#
Pin4 Pin6 Pin8
None
HDD LED Pin Assignment
VCC IDEACT#
Pin9 Pin10