SOYO G668 Ethernet IP Phone User Guide
-19-
nonlocal prefix:
With
enable
or
switch
selected in
innerline
dropdown list,
please fill the number switching to backup setting 2 here, such as 57.
use digitmap:
Enable/disable digitmap by checking/unchecking the box.
ring type:
Set ring type by selecting corresponding item from drop down list.
dtmf 0-9:
Set ring as ordinary rings in different frequency.
not disturb:
Set the phone do not ring by selecting this item.
pcmring:
Set ring as music shipped from factory by selecting this item.
user define
：
Set ring as music saved by user by selecting this item.
answer:
Enter a number from 0 through 60 to set the entries of the seconds
before the phone answer the call auto or forward the calls. To disable auto
answer function, please set this parameter as 0.
predial time:
Set time limit from picking up the speaker to dialing the first the
number.
interdial time:
Set time limit between dialing two numbers.
postdial time:
Set time limit from dialing the last number to placing a call. If the
next number is not dialed within the post dial time limit, then the phone will call
the dialed number auto.
Audio Settings
Note:
Please check with your VoIP service provider for the audio settings.
Changing the settings without proper guidance may result the IP phone not
functioning.
audio type:
Set audio type of the phone by selecting item from drop down list.
The options are
g7231
，
g729
，
gsm610
，
g711u
，
g711a
and
auto
.
audio frame:
Set audio frames in RTP package. With G723 audio codec used,
set it as 1; with G729 audio codes used, set it as 2.
g.723.1 high rate:
With
g.723.1
selected in audio type dropdown list,
enable/disable
g.723.1
high rate by checking/unchecking this option.
vad:
Enable/disable VAD (voice activity detection) by checking/unchecking this
box.
agc:
Enable/disable AGC by checking/unchecking this box.
