BIOS Setup 33
Supervisor Password
This Main Menu item lets you configure the system so that a password is required
every time the system boots or an attempt is made to enter the Setup program.
depending on the setting you made in the "Security Option "
of the "BIOS Features
Setup"
.
Change the password as follows:
1.
2.
3.
4.
Choose "Supervisor Password"
in the Main Menu and press <Enter>. The
following message appears:
"Enter Password:"
Enter a password and press <Enter>.
(If you do not wish to use the password function, you can just press <Enter> and
a "Password disabled" message appears. )
After you enter your password, the following message appears prompting you
to confirm the new password:
"Confirm
Password:"
Re-enter your password and then Press <ESC> to exit to the Main Menu.
Important:
If
you forget or lose the password, the only way to access the
system is to set jumper JP5 to clear the CMOS RAM. All setup
information is lost and you must run the BIOS setup program
again.
User Password
This Main Menu item lets you configure the system so that a password is required
every time the system boots or an attempt is made to enter the Setup program,
depending on the setting you made in the "Security Optio n"
of th e "BIOS Features
Setup" Change the password as follows:
1. Choose "User Password"
”
in the Main Menu and press <Enter>. The following
message appears:
“E
"Enter Password”
2,
Enter a password and press <Enter>.
(If
YOU
do not wish to use the
password function, you can just press <Enter> and
a "Password disabled "
message appears. )
Summary of Contents for 5SM2
Page 1: ...j p l Pentium...