Appendix
J100 Cyrix CPU Jumper
SYÐ5EA mainboard adds a new jumper (J100) for better performance
with Cyrix CPUs. Follow the procedure below to use this jumper
correctly:
1.
Short J100 when you want to install a Cyrix CPU. Default setting is
Open for non-Cyrix CPUs.
2.
Press <Enter> to go to the BIOS Setup Menu when booting the
computer;
3.
Select ÒChipset Features SetupÓ;
4.
Choose ÒEnabledÓ in item ÒLinear BurstÓ, then do ÒSAVE & EXIT
SETUPÓ.
Below figure shows you the jumper location on this mainboard.
J100
EQ6617
P.B. SRAM
64Kx32
EQ6617
P.B. SRAM
64Kx32
EQ6618
Figure AÐ1. Location of J100