SOVICO IPA-35, Operation Manual

Page: 7 / 16

MIXING AMPLIFIER
IPA-35 / IPA-65 7
1. MIC INPUT JACK (MIC1, MIC2)
These jacks are used when you want to use MIC 1, 2 inputs and it is consisted with balance circuits to block noises.
2. MIC 1 MUTE CONTROLLER
By incoming signal on MIC1, this controller blocks AUX input signal by priority order.
3. AUX INPUT JACK
These jacks connect auxiliary input signal and it is used to output the sounds of CD, TUNER, DECK, or
WIRELESS MIC through this unit.
4. MIC 2, AUX 1 SELECT SWITCH
This switch selects the input when choose MIC 2 or AUX 1.
5. TELEPHONE INPUT TERMINAL
It connects audio signal of telephone exchange. If a signal is entered to TEL IN terminal, the low priority signal is
blocked.
6. SPEAKER OUTPUT
This terminal is used to connect speaker, be careful to do not overload.
7. POWER INPUT
To this terminal, put power cord.
8. FUSE
This holder contains the AC overload protection fuse.
If the fuse has blown out, replace if with a fuse of the same type and rating, as shown below.
AC FUSE RATING
MODEL
IPA-35
IPA-65
100V~120V AC
1.6A/250V
2A/250V
220V~240V AC
1A/250V
1A/250V