Sovereign BBQs & Grills Australia
Phone (Intl +61 7) 5644 1230
Fax (Intl +61 7) 5519 3529
Web: www.sovereignbbqs.com
Email: [email protected]
Stove Top Option
It is possible to configure your Sovereign RV Tuckerman BBQ as a stove top appliance. Once the
BBQ plate is removed, the semi-permanent oven wire can be used to support pots and pans. The Oven
Wire is
not
a grilling surface.
USING YOUR SOVEREIGN RV TUCKERMAN BBQ
Lighting
(1)
Open the BBQ lid, on all occasions, prior to lighting.
(2)
The control knob should be in the OFF position.
(3)
Turn the gas on at the supply point to the BBQ.
(4)
To ignite - push the control knob in and turn it to the left (anti-clockwise). Repeat this action (the
piezo ignition will make a clicking sound each time you do this) until the BBQ ignites, and then
continue to hold the control knob in for at least 3 seconds until the flame failure valve
(thermocouple) has engaged (depending upon various conditions, it make take more than 3 seconds
for the flame failure valve to engage on occasion). To confirm ignition has occurred, and after
ignition upon release of the control knob that the flame failure valve has engaged, a sight hole is
provided beside the control valve.
The sight hole will allow you visually confirm the burner is alight (please use appropriate caution
when lighting, including not looking directly into and/or too closely at the burner, through the sight
hole). Once the flame failure valve has engaged after several seconds, you can then release the control
knob and adjust the BBQ to your desired temperature (as per the low, medium and high heat settings
as detailed on the side of your BBQ adjacent the control knob).
