5
4
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
Customer Helpline
0845 450 5299
www.gardenservicecentre.co.uk
In the Box
Parts
Tools
A
1
A
Blower vacuum
B
Lower blower tube
C
Upper blower tube
D
Dust bag
1
Plug wrench &
philips screwdriver
1pc
2
Allen key
3
Mixing bottle
2
C
D
B
Assembly
Preparing to assemble the blower vacuum
WARNING!
Always take care when removing the packaging to prevent damage to you or to the
blower vacuum.
IMPORTANT!
Before assembling the blower vacuum, check all the parts indicated in the manual
are in the box. Inspect all the parts for signs of damage. Do not assemble the blower vacuum if
you observe any damaged components.
1. Remove all parts of the blower vacuum from the box and carefully remove all packaging. Take
care not to lose any instructions which may be affixed to the parts. These provide important
information which will be required while assembling the blower vacuum.
2. Keep all packaging until the blower vacuum is fully assembled and has been operated
successfully.
NOTE!
Always recycle the packaging in accordance with local recycling schemes.
Loose the 3 screws (screw
A
), and then insert the lower tube into upper tuber, and make sure the
ratchet has caught.
Tighten the 3 screws (screw
A
) by allen wrench.
Step 1 - Assembling the lower and upper tube
A
40:1
5
10
5
10
3
