Section 1. Installation
IM P O R T AN T!
This appliance m ust be left to stand in an upright position
for at least 4 hours before being switched on for the first tim e.
Rem ove all packaging and securing tape from the appliance.
W ash the interior of the appliance with luke warm water containing a
sm all am ount of bicarbonate soda (5m l to 0.5 litres of water).
Position the appliance in a dry atm osphere and out of direct sunlight.
Do not position next to a cooker or other sources of heat, i.e. radiator.
If positioned next to another fridge or freezer, leave a m inim um gap of
2cm between the appliances in order to avoid condensation.
A clearance of 50m m should be left above the appliance. If this cannot
be achieved you should ensure a clearance of 25m m is m aintained on
each side of the appliance.
Fit the plastic wall spacers to the condenser on the rear of the appliance,
this will ensure an air gap between the appliance and the wall.
Do not place or store heavy item s on the top of this appliance.
Ensure that the appliance is positioned on a firm flat floor.
This appliance m ust be level. Adjust the level by screwing the adjustable
feet up or down (use your fingers or a suitable spanner).
Ensure that the appliance is upright and both feet are in firm contact with
the floor so that the cabinet is stable.
Connect the plug to an adjacent 13am p socket outlet and ensure that the
appliance is not standing on the supply cable.
S ection 2. S afety Advice
Please read this booklet thoroughly before installing and switching on the
appliance. The m anufacturer accepts no responsibility for incorrect
installation and usage.
If this appliance is to replace an old refrigerator with a lock, as a safety
m easure break or rem ove the lock before disposal.
Your old appliances contain insulation gases and refrigerant that m ust be
disposed of correctly. Please ensure that the refrigerant circuit is not
dam aged before the appliance is taken away for correct disposal in line
with current legislation. If there is any doubt contact your Local Authority
for instructions.
This appliance may contain the refrigerant isobutene (R600a). This is a
natural gas with a high level of environmental compatibility; however,
caution is required as isobutene is a flammable gas. It is essential to ensure
that refrigerant tubes are not damaged during transportation and the
installation of the appliance. In the event that the refrigerant circuit is
6