manualshive.com logo in svg

Sovereign CDB26A, Assembly Manual

Share
Download
Sovereign CDB26A Assembly Manual Download Page 10

  

  

11

10

  

  

Customer Helpline 

01904 727503

www.gardenservicecentre.co.uk

Customer Helpline 

01904 727503

www.gardenservicecentre.co.uk

Operating the Grass Trimmer

How to Replace the Spool/Spool Line

Step 4 - Extending spool line while trimming

Step 1 - Removing the spool

1) While the line spool is running at full speed, tap its underside briefly against the ground. 
2) If the spool lines are still not sufficiently extended, tap the underside against the ground again.

3) If the line has already become too short, it will no longer be extended by pressing the 

underside against the ground. You must pull it out from the line spool by hand.
4) Switch off the motor.
5) Lay the machine on the ground.
6) Push by hand on the underside of the line spool and pull both lines out until they are 

somewhat longer than the edge of the protective bonnet. The lines are trimmed to the correct 

length by the line trimming blade located on the grass trimmer guard.

WARNING!

 Ensure there is mixed fuel in tank with the correct ratio of fuel to oil. Make sure all 

guards and handles are properly and securely attached.

Stopping

Release the throttle trigger and set the switch to STOP (0). 

  Stopping

Step 2 - Replacing the spool line in the spool

– Twist off (anti-clockwise to loosen) and remove the cover of the spool.
– Remove the spool.

Do not lose the spring!

SPRING

STRING HEAD

EYELETS

– Completely remove the remains of the spool.
– Make a nick in the middle of the new line, and hook it into the slot in the spool.
– Wind on a spool line on each side of the spool in the direction of the arrow.

G

SPOOL

ANCHOR

HOLE

ARROWS ON 

SPOOL

LINE

SLOT

SECOND LINE

FIRST LINE

SLOT

ARROWS ON 

SPOOL

SPOOL COVER

Tighten

Loosen

Summary of Contents for CDB26A














Reviews:

No comments

Brands by name

Popular brands

Load more brands