23
8. DRILLING
When drilling into a hard smooth surface, use a centre punch
to mark the desired hole location. This will prevent the drill bit
from slipping off centre as the hole is started. Hold the tool
firmly and place the tip of the bit at the point to be drilled.
Depress the switch trigger to start the tool. Move the drill bit
into the workpiece, applying only enough pressure to keep the
bit cutting. Do not force or apply side pressure to elongate
a hole.
If you want to activate the drill function (for drilling wood or
plastic), turn the torque adjustment ring on the drill position.
9. DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the
battery pack properly.
This battery pack contains Lithium batteries. Consult your
local waste authority for information regarding available
recycling and/or disposal options. Discharge your battery pack
by operating your drill, then remove the battery pack from
the drill housing and cover the battery pack connections with
heavy-duty adhesive tape to prevent a short circuit and energy
discharge. Do not attempt to open or remove any of the
components.
1
3
5
7
1
3
5
7
F
Summary of Contents for 612321
Page 1: ...612321 D030I 18V June 21 18V CORDLESS HAMMER DRILL KIT...
Page 20: ...b a C 3 3 4...
Page 21: ...1 3 5 7 D 4...
