24
Some useful general precautions are:
Never position the nozzle nearer than 30cm to the area being
cleaned (If in doubt test on a small area first).
Never use the pressure washer on areas with loose paint or
poorly secured trims/fittings.
Always keep the water jet moving over the surface. Do not
leave the jet in the same position for a prolonged period as
this could cause damage to the surface.
To be sure always check with the suppliers of the item to be
cleaned that surfaces are suitable for pressure jet washing.
WARNING!
Before using the pressure washer make sure that
there are no other people or animals in the work area.
Press the High-pressure washer ON
To safely turn the pressure washer on, please follow the below
instructions.
1. Make sure that the pressure washer has been correctly
assembled and prepared for use.
2. Press the ON/OFF switch to ON position marked as I. (Figure
11 above)
3. Adjust the spray.
4. Release the trigger lock and point the nozzle at the area to
be cleaned.
5. Squeeze the trigger.
6. Proceed with the clean.
