19
PRIMER BULB 3~5
TIMES FOR COLD START
STOP/START-LEVER
CLOSED
PULL STARTING
HANDLE
Pressing the primer button too many times could cause
the engine to flood.
NOTE!
When starting a warm engine, the primer does not
need to be used. If the engine stops due to a lack of petrol,
refill and press down the primer 3-5 times.
1-2 Start/Stop bar activation
Pull the Start/Stop bar towards you.
1-3 Pull cord handle
With the right hand, slowly but firmly pull the starter handle
and rope from the pull cord guide until you feel resistance,
then pull briskly. If the engine fails to start after three pulls,
repeat the start process. When the engine starts, return the
starter rope to the pull cord guide gently.
Do not use the primer bulb for hot start.
STEP 3 - TO STOP, RELEASE STOP/START BAR
Failure to start
If the engine won’t start after you have operated the starter
several times, the engine may be flooded with excess fuel.
Use the following procedure to clear and start a flooded
engine:
A. Release the stop/start bar.
B. Remove the spark plug, dry it, and then reinstall it.
