background image

17

3.  The battery pack will be fully charged in 4-5 hours. And the 

three LED (A2) lights turn green to tell you that the battery 
pack is fully charged.

Important charging notes

Longest life and best performance can be obtained if the 

battery pack is charged when the air temperature is between 

18-24

o

C. Do not charge the battery pack in a very low or 

very high air temperature. This is important and will prevent 

serious damage to the battery pack.
1.  When using your tool continuously, the batteries in your 

battery pack will become hot. You should let a hot battery 

pack cool down for approximately 30 minutes before 

attempting to recharge.

2.  The charger and battery pack may become warm to touch 

while charging. This is a normal condition and does not 

indicate a problem.

3.  Use the charger in normal room temperatures whenever 

possible. To prevent overheating, do not cover the charger 

and do not charge battery packs in direct sunlight or near 

heat sources.

4.  If the battery pack does not charge properly:

(1). Check the main socket by plugging in a lamp or other 

appliance.

7

5

A1

A2

Summary of Contents for 555375





























Reviews: