Southwood RG4, Owner'S Operation Manual, Page: 11 / 12

PROBLEM CAUSE SOLUTION
Burners do not ignite No gas flow Check Gas valves
Burner ignites then goes out Air intake blocked. Adjust air intake
or is too weak Low gas Pressure Check Gas Pressure
Wrong gas type Check Nat/LP gas orifice
No or wrong Regulator Check gas regulator
Burner Backfires Too much primary air Adjust air intake
Individual Spits do not rotate Defective Switch Replace Switch
Defective Motor Replace motor
Improper Spit placement Re-seat Spit into connector
Loose Spit connector Tighten connector be -
tween spit / motor
All spits do not rotate Blown fuse Replace fuse (< 2 Amps)
Light does not work Blown Fuse Replace Fuse (< 2 Amps)
TROUBLESHOOTING
SOUTHWOOD
ROTISSERIE MACHINES
Southwood Manufacturing • A Division of US Restaurant Group • www.usrestaurant.com • sales@usrestaurant.com • (800)-764-1172
IMPORTANT FUSE INFORMATION
Left fuse is for light bulb. Right fuse is for motor.
DO NOT INSERT ANY FUSE GREATER THAN 2 AMPS
1 or 2 amp fuses may be used in these machines. Never above 2 Amps. Generally if both
the lights and the spits are not working, this is because teh fuses need to be replaced.