CALLER ID OPERATION (CONT.)
Reviewing All Call Records
1. After you have reviewed all of the new
calls, continue press the VOLUME/
SCROLL
or
button, the display will
show the calls stored in memory.
2. After the last call record is reviewed,
the display will show “END OF LIST”.
Caller ID Redial
Your telephone allows you to redial a
phone number stored in the Caller ID
memory.
1. Press the VOLUME/ SCROLL
or
button to select the Caller ID number that
you want to dial.
2. Press the TALK button will activate
the handset to dial the desired number.
3. You may dial the last incoming
number from the base without using the
handset. Press the FLASH/REVIEW
button on the base, then press the
SPEAKER button. The speakerphone will
turn on and dial the last incoming
number.
With current telecom system, there are 4
redial options:
(1) 7 digits without a 1 prefix
(2) 7 digits with a 1 prefix
(3) 10 digits without a 1 prefix, and
(4) 10 digits with a 1 prefix.
If you want to add a 1 prefix, press
FORMAT/CHANNEL in the handset or
MENU/FORMAT in the base after you
have selected the Caller ID number from
the list.
NOTE:
The 1 prefix can only add in the 7 digit
and 10 digit Caller ID number.
To Store a Caller ID Number to
Memory:
1. Press VOLUME/ SCROLL
or
button to select number from Caller ID
list.
2. Press MEMORY button. The display
will show “SAVE TO MEMORY”
3. Press MENU/CONFIRM. The display
will show “ENTER LOCATION”.
4. Enter the memory location you want
to store. The display will show “SAVE AT
LOCATION x” where x is the location
number you entered.
5. Press MENU/CONFIRM to confirm.
The display will show “MEMORY
SAVED”.
6. Press FLASH/EXIT to exit to standby
mode.
NOTE:
If the location you selected already has a
memory stored, the display will show
“MEMORY OVERRIDE”. Press
MENU/CONFIRM to override or press
DELETE to change to another location.
22
23
CALLER ID OPERATION
Receiving a Call
After the first ring, the caller’s name and
telephone number will display on the
display. The New Call LED will flash until
you review ALL your new calls.
The Caller ID information (of up to 50
callers) will be stored in the order
received. If the unit receives more than
50 calls, the oldest Caller ID information
will be erased.
NOTE:
If you answer your incoming call before
the second ring, the unit will not display
the call information.
Receiving Call Waiting Caller ID
When you are on a phone call and there
is an incoming call, your telephone will
display incoming call waiting Caller ID
information.
1. You will hear a beep and the
telephone will be muted momentarily
while the display shows the Caller ID
information of the second caller.
2. Press FLASH/EXIT to access the call
waiting call (the second caller).
3. When you access the call waiting
call, the Caller ID information will
disappear and a new call timer will be
displayed.
4. After your second call is end, press
FLASH/EXIT to talk to the first caller.
IMPORTANT:
You must subscribe to Call Waiting and
Call Waiting Caller ID service from your
local telephone company in order to
receive Call Waiting Caller ID
information.
Reviewing New Call Records
1. In standby mode, when the display
shows NEW=XX TOTAL=XX, press the
VOLUME/SCROLL
button will display
the information for the last new call
received. The “NEW” icon will light if the
call you are reviewing is a new call.
2. Continue pressing the VOLUME/
SCROLL
button to review all new call
records in the order the calls were
received. If the received call information
is the same as any of the new calls, the
unit will display the “RPT” icon to
indicate a repeat call.
When a name received exceeds 12
characters, the first 12 characters will be
shown first. Press the “#>” button to
view the remaining characters.
3. After the final call has been
displayed, press the VOLUME/ SCROLL
button again. The New Call LED will
stop blinking.
NOTE: The base unit can only store the
last incoming call information. Press the
FLASH/REVIEW button to review.