Note:
a. When the battery gets low while the phone is in use, there will be
a low-battery beep from the handset. The handset will also
display "LOW BATTERY" on the second line of the LCD.
b. If the battery becomes low while you are on a call, terminate the
call quickly and put handset in the base to recharge the battery.
c. The battery will hold its charge for several days out of the cradle,
depending on use.
To Replace Batteries
1. Remove battery cover
2. Remove old battery
3. Install new battery
4. Close battery cover.
5. Place the handset on the base unit.
Note: Use only the battery type that is recommended for use with
this phone.
6. Charge 16 hours before first use.
Note: To maximize your battery's life, periodically drain the
battery fully and then recharge it. To do this, unplug the phone
line cord from your wall phone jack. Remove Handset from Base/
Charger unit and press the TALK button. Handset Batteries must
then be recharged for a full 16 hours.
Setup
To set Language:
1. After installing the FULLY CHARGED handset battery, the
handset display will light and will show "NEW CALL 00".
2. Press "PROG/FLASH" to enter the program menu.
3. You can choose to see your display in 1ENG (English), 2FRA
(French) or 3ESP (Spanish). Press VOL/CID “
” or “
” button
or 1, 2 or 3 on the keypad to choose the desired language.
4. Press the "PROG/FLASH" key to confirm the display language
and press “EXIT/*” to leave the program menu.
To set Ring Tone:
This telephone offers 3 standard ring tones for user to select.
1. Press "PROG/FLASH" 2 times to enter the program menu ringer
tone setting.
2. You can choose from ringer tones 1-3 by pressing VOL/CID "
"
or "
" button or 1, 2 or 3 on the keypad for changing the option.
3. Press "PROG/FLASH" to confirm the ringer melody and press
“EXIT/*” to leave the program menu.
To set Tone/Pulse
1. Press "PROG/FLASH" 3 times to enter the program menu.
2. Press VOL/CID "
" or "
" button or press 1 or 2 on the keypad
to select the TONE/PULSE item.
3. Press "PROG/FLASH" to confirm the setting and press EXIT to
leave the program menu.
To set Default
This telephone allows you to restore the phone setup options back to
factory default. The default setting will reset Menu Language back to
English, Ringer Tone back to 01, and Tone/Pulse back to Tone.
NP
NQ