Telephone Operation
Tone/Pulse Switch
SET THIS SWITCH TO THE
SERVICE (TONE OR PULSE)
SUPPLIED TO YOUR PHONE.
If you are not certain of which service
you have, set the switch to TONE. Lift
the HANDSET and press any number on
the KEYPAD. If the dial tone persists,
reset to pulse.
Dialing a Call
1. Lift the HANDSET or press the
SPEAKERPHONE Button (the
SPEAKERPHONE Button will light).
2. When you hear a dial tone, dial the
number.
During the conversation, the
Speakerphone loudness can be adjusted
with the SPEAKER VOLUME
CONTROL on the side of the BASE.
The Receiver loudness of the Handset can
also be adjusted with the RECEIVER
VOLUME CONTROL on the side of the
base.
3. At the end of the call, return the
HANDSET to the cradle or, if you have
used the SPEAKERPHONE, press the
SPEAKERPHONE Button again. The
SPEAKERPHONE Button LED will
go OFF.
Receiving a Call
1. When you hear your phone ring, lift
the HANDSET or press the SPEAKER-
PHONE Button (the SPEAKERPHONE
Button will light).
After the first ring, the LCD display will
light, the NEW CALL icon and call
information will appear on the display,
and the New Call LED will flash. The
New Call icon and New Call LED
continue flashing until you review ALL
your new calls.
The caller ID information will be stored
in the order received.
12
2. At the end of your call, return the
HANDSET to the CRADLE or press the
SPEAKERPHONE Button again
(the SPEAKERPHONE Button LED will
turn OFF).
When switching a call from the
HANDSET mode to the SPEAKERPHONE
mode, press the SPEAKERPHONE Button
before you place the HANDSET in the
CRADLE. To switch from the
SPEAKERPHONE to the HANDSET, lift
the HANDSET.
NOTE:
1. If you answer your telephone before
the second ring, the unit will not display
any caller ID information .
2. The information will be displayed
on the LCD for 20 seconds. The maximum
number of digits that can be displayed on the
LCD is 12 and the maximum call count is
64 (old call + new call). Your FM2555
will automatically erase the oldest call
record and replace it with the newest call
record when the memory is full.
AM
NEW
CALL
AM
