FIGURE 6: Note Orientation of Crease
FIGURE 7: Fold Panels Downward as Shown
6.0
Maintenance
The Martin Yale Model CEZ Creaser typically requires very little maintenance, however the following
items will ensure years of trouble-free, safe and satisfactory use:
6.1
Clean unit as needed with a slightly damp rag using water or window cleaner.
6.2
Periodically use a can of compressed air to blow out dust and debris from the Creaser slot.
6.3
Frequently check the Power Supply and Footpedal wires for damage and wear.
7.0
Troubleshooting
7.1
No Power, Green Power LED is off:
1. Unit not plugged in or outlet is dead; check connections.
2. Power switch is off; turn switch on.
3. Desktop power supply is damaged; replace power supply.
4. Electrical failure; have unit serviced by qualified technician.
7.2
Creaser will not function, Green Power LED is on:
1. Creaser unit jammed; see
“Machine Jam” instructions below.
2. Self-resetting circuit breaker in Creaser has tripped; turn unit off for 15 seconds to reset.
3. Electrical failure; have the unit serviced by qualified technician.
7.3
Machine Jam:
If the Creaser jams, both yellow lights will blink on and off repeatedly.
1. Press the Reverse (Dejam) Pushbutton (Figure 2). The Reverse (Dejam) Indicator light
will now be lit continuously.
2. Press the Cycle Pushbutton; this will cause the machine to reverse, releasing the jam.
3. Remove paper and correct the cause of the jam before attempting another crease.
Typical causes of jams include foreign objects and improper paper size or thickness.
4. If jam will not clear, contact Technical Support.
Note on the Reverse (Dejam) function:
Under normal machine operation, the creaser is
not allowed to run in reverse. To test the reverse feature,
hold
the Reverse (Dejam)
Pushbutton down while pressing the Cycle Pushbutton. This action forces the Creaser to run
in reverse and should
only
be used to confirm proper function of the reverse feature.
For continued malfunction or other issues, contact Technical Support at 1-800-225-5644.