southpaw enterprises, inc.
®
Instruction Sheet
Replacement Eyebolt Kit 7015
Store these instructions along with the enclosed maintenance checklist
in a safe place. You may also access them on our website.
MATERIALS LIST:
1 - Eyebolt 1/2-13 x 6”
1 - 1/2” Flat Washer
1 - 1/2-13 Lock Nut
TO REMOVE WORN EYEBOLT:
Insert a large screwdriver through the “eye” of the eyebolt to keep it from turning while you loosen the nut using a 3/4”
wrench. Remove the eyebolt and discard the used parts. Do not reuse the old lock nut or washer.
TO INSTALL NEW EYEBOLT:
Insert the new eyebolt into the beam from the bottom to the top. Put the 1/2” washer on the bolt. Start the 1/2” lock nut
on the bolt. Insert the screwdriver through the “eye” of the eyebolt to keep it from turning while you tighten the nut.
When the nut is almost tight, turn the screwdriver to properly align the eyebolt and tighten the nut securely.
Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file
this Instruction Sheet in an accessible location. The Instruction Sheet must be read and familiar to anyone
who is using Southpaw Enterprises Equipment.
IMPORTANT: Please check equipment immediately for any damage
that may have resulted during shipping. If any damage has occurred,
please contact Southpaw Enterprises, Inc. immediately.
Warning: Failure to properly install a forged
steel eyebolt (1/2” or 5/8”) may result in serious
injury or death. If you have any questions
about the installation of the forged steel
eyebolt, please contact Southpaw Enterprises
FORM CODE: XI-7015
© 2007 Southpaw Enterprises, Inc.
If you have any questions or comments, please call or write
Southpaw Enterprises, Inc.
P.O. Box 1047, Dayton, Ohio 45401 -1047
Toll Free - (800) 228-1698
Come see us on the World Wide Web at http://southpawenterprises.com
Southpaw
Enterprises Inc.
®
Safety Precautions -
The safety of your clients is dependent on the appropriate choice of activity to match, yet challenge their
physical abilities. Use appropriate spotting / safety techniques. In addition, the layout of your activity area, proper installation and
maintenance of your equipment is critical. Southpaw equipment is not intended for recreational or outdoor use. Under no condition
should this equipment be used without proper supervision.
This sheet is for example only.
It is not meant to, in any way, replace local, county, state, or Federal standards. Be aware - it is
your responsibility to find all pertinent safety information that pertains to your facility.
♦
Check ceiling eye bolt for wear and movement. Use a Southpaw Safety Rotational Device to prevent
abnormal wear.
♦
Client should always wear a safety helmet with all suspended equipment.
♦
Floor mats of proper thickness should be positioned properly under and around all suspended
equipment.
CAUTION
