ENG - 8
Questions? Call Toll Free at 1-800-737-2112
Copyright © 2015 MAT Engine Technologies, LLC
Assembly
• Save all instructions
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled.
References to the right or left side of the tiller are from the viewpoint of the operator’s position behind the tiller.
WARNING
Do not operate tiller if it is damaged or not completely and correctly assembled.
WARNING
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
WARNING
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
The following components will be found in the carton.
Quantities shown in ( ).
1. (1) Tiller
2. (1) Handle Assembly
3. (1) Depth Regulator lever
4. (1) Tiller Operator’s Manual
5. (1) Engine Manual
6. (1) Bottle of Engine Oil
7. (1) Parts bag containing the following
a. (2) M10x25 mm hex head bolts, lock washers, flat
washers and flange nuts for assembling
lower handle
b. (4) M8x50 mm saddle bolts for assembling
upper handle
c. (4) Handle knobs for assembling upper handle
1. Remove all parts and packaging components.
2. Use a utility knife to cut all 4 vertical edges and lay the
side panels flat around the tiller.
3. Remove any remaining packaging.
How to Remove Tiller from Carton
A
d. (2) Wheel locking pins
e. (1) Pin, for depth regulator lever.
f. (4) M8x20 hex head bolts with split lock washers, flat
washers and flanged nuts for attaching front guard.
g. (2) Cable ties
8. (2) Wheel and tire assemblies
9. (1) Front Guard