Figure 9
Attach the Door Panel (13) to the
assembled unit using Screws (M).
Tighten Screws (M) with Phillips
screwdriver (not included).
Attach the Knob (H) to the door using
Bolt (I).
Tighten Bolt (I) with Phillips
screwdriver (not included).
Figure 10
Note: Complete this step for all
drawers.
Insert Nuts (J) into corresponding holes
on Drawer Face Panel (16).
Attach Drawer Right Panel and Drawer
Left Panel (18/17) to Drawer Face
Panel (16) with Bolts for Drawer (K).
Insert Drawer Bottom Panel (20) into
inner grooves of Drawer Right Side,
Drawer Left Side Panels (18/17) and
Drawer Face Panel (16).
Insert Nuts (J) into corresponding holes
on Drawer Back Panel (19).
Attach Drawer Back Panel (19) to the
drawer assembly and fasten with Bolts
for Drawer (K).
Attach Knob (H) to Drawer Face Panel
(16) with Bolts (I).
Tighten all Bolts (I) with Phillips
Screw`driver (not included)
17
18
20
19
K
K
K
K
J
J
J
J
J
J
To achieve uniform clearance around the door,
you may need to adjust the door by tightening or
loosening the two screws on the hinge.