LGCY Series
Page 3
2.1.6 The lifting height shall be appropriate.
2.1.7 The lifting acceleration and deceleration shall be in the allowable safe range.
2.1.8 Ensure that all personnel are clear of the danger area during the lift.
2.1.9 Ensure the bearing capacity of placement ground when selecting the site for placing the
compressor.
2.2 Traction and Parking (Trailer Mount Only)
2.2.1 Preparation before traction
A. Check whether the compressor draw bar, pull ring and trailer connector are secure and in good
conditions.
B. Ensure the trailer connector is connected securely.
C. Ensure the connector is fully connected and fastened.
D. Ensure the tire pressure and check whether the axle, fixed bolt and vehicle wheel are fastened.
E. Ensure all doors and tool box covers are tightened and locked.
F. Ensure no one is in the equipment before closing the door.
G. The brake equipment shall be pre-tightened appropriately according to the gradient before downhill
dragging.
2.2.2 Traction
A. Avoid dragging when the gradient is greater than 15º.
B. Follow the local specifications on road traffic safety.
C. Do not exceed the free steering angle for forward or reverse travel. Do not drag the equipment
barbarously.
D. Avoid obstacles such as pit and stone and soft road surface.
E. Do not drag the compressor at excessive speed.
F. Do not carry a person on the compressor.
G. Do not stand and travel between the compressor and trailer.
2.2.3 Compressor Parking
A. Place the compressor on the ground as flat as possible.
B. Check whether the parking road surface can bear the weight of compressor.
C. Select the wind direction when parking the compressor, so the exhaust air and heat discharged by the
diesel engine can be blown away to prevent cyclic inhalation, compressor air displacement drop,
overheat and diesel engine power dip, etc.
D. The parking site shall be provided with clean air and good ventilation conditions. ensuring sufficient
heat dissipation space, operation and maintenance space at the periphery.
E. Park the equipment at the shady place free from sunlight exposure in summer.
F. Set the brake.
G. Chock both sides of wheel and avoid displacement of compressor unit.
H. Set warning signs and/or warning lights (night) when parking on the road to prevent traffic accident.
Summary of Contents for JCD-900 Series
Page 25: ...LGCY Series Page 23 8 Wiring diagram...
Page 31: ...LGCY Series Page 29...
