Manual P/N 211.410K
Updated 11292018
19
Flame Pack Series 400 Operation and Service Manual
13.0: Shut Down Procedure
1. Place thumb over intake cone. This will put out the flame by stopping the air flow. Both
audible and visual alarms should come on within 3 seconds.
2. Turn switch to the off position. Allow the fuel to flow for 15 to 20 minutes with exhaust
flame arrestor pointing down. Doing this will dry the cell. Close the fuel valve.
NOTE: after
valve is closed, it is normal to continue to hear gas flowing for several seconds as
pressure in the Flame Pack is released.
3. Clean Flame Pack before storage. See “Cleaning the Flame Pack 400”, Section 15.
