South Pacific Industrial PRO 800F, Manual

Page: 9 / 19

8
◆
Direct control system:
Note:
For safety reason, do not connect the power source
direct to the battery. Please connect the power cable to
the main power switch on your boat.
SW-200 with dynamic brake, can not be parallel.
◆
Indirect control system:
Using foot switches or hand held switch for multiple control,
a solenoid K-200 is necessary.
If you have an existing control unit (SW-030 or SW-200),
you
must remove it before installing this indirect control
system. Also, do not attach control unit (SW-030 or SW-
200) to K-200 as an up/down switch (SW-025).
The direct control system and indirect control system can not
exist concurrently.
If the winding direction is not as desired, please change over
the wires from the windlass to the solenoid K-200.