South Bend Tools
For Machines Mfd. Since 10/20
Model SB1100 & SB1101
-17-
P R E P A R A T I O N
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are
covered or coated in heavy-duty rust preventative
(if applicable).
To assemble dust collector:
1.
Attach (4) swivel casters to base with (16)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see Figure 10).
2.
Align motor/impeller assembly with
mounting holes on base. Attach assembly to
base with (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure 11).
3.
Place square gasket on impeller outlet rim
(see
Figure 12).
4.
Attach outlet tube to impeller outlet with (5)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see Figures 13 &
14). Do not use three inner mounting holes.
Figure 10. Example of swivel caster attached to base.
Figure 12. Square gasket in place on impeller rim.
x16
Figure 11. Motor/impeller assembly on base.
x4
Figure 13. SB1100 outlet tube attached.
x5
Inner
Mounting Hole
Figure 14. SB1101 outlet tube attached.
x5
Inner
Mounting Hole
Square
Gasket
