South Bend Tools
For Machines Mfd. Since 9/20
Model SB1092 & SB1094
-3-
I N T R O D U C T I O N
Description of Controls
& Components
Refer to Figures 1-2 and the following
descriptions to become familiar with the basic
controls and components used to operate this
machine.
A. Filter Brush Motor:
Turns on automatically
when main motor is turned OFF. Knocks
dust cake off filter pleats, cleaning filter and
maintaining air flow.
B. Control Box:
Controls motor operation with a
thermally protected magnetic switch. Houses
an RF receiver for remote control operation.
C. Start Button:
Turns machine ON.
D. Stop Button:
Turns machine OFF.
E. Inlet Adapter:
Allows connection of multiple
4" ducts to main inlet port. SB1092 adapter
has two inlets and SB1094 adapter has four
inlets.
F. Pressure Gauge:
Displays vacuum pressure,
indicating when filter and collection bags
need to be cleaned or replaced. Clean filter
when operating pressure drops below
200mmAq. If operating pressure reaches
150mmAq and cleaning does not improve
performance, replace the filter.
G. Drum Lock Handle:
Secures dust collection
drum to lid when pressed down. Releases
collection drum when lifted.
H. Filter Collection Bag:
Collects fine dust
particles from filter.
I. Collection Drum:
Collects large dust
particles. Equipped with vacuum equalizer
for using plastic collection bags, and an
inspection window to see when drum is full.
J. Timer Indicator:
Displays current timer
setting.
K. Timer Control Buttons:
Changes timer
setting between
∞
(indefinite operation), 2, 4,
6, and 8 hours.
A
F
H
B
E
C
D
G
I
Figure 1. SB1092 & SB1094 components.
Figure 2. SB1092 & SB1094 remote control.
J
L
K
M
L. ON Button:
Turns motor ON. If a timer
setting is selected, motor automatically turns
OFF after the selected amount of time.
M. OFF Button:
Turns motor OFF.
Note: The remote control operates on radio
frequency and has a 50-ft. range. It does not need
to be aimed at the control box to operate.
