Installation & Trouble Shooting
Trouble Shooting
If the UNO module stops working, please try these troubleshooting tips below. After trying all the troubleshooting
tips please don’t hesitate to call us.
Installation
Turn off the UNO module and then press and hold the red
thermal reset button on the side until you hear a click.
Attach the bracket to the back of the UNO module and place on a table edge. Then tighten to secure the UNO by using a
5mm allen key. The standard bracket size is 25 - 30mm, a larger 50mm bracket is available upon request. A packer bracket
is also available to lift up the UNO for larger chargers.
Check the 800mm male GST drop lead cable is connected to
the female starter lead.
Check the starter lead is plugged into the wall socket.