18
19
6.
Certification
Printing Method
Direct Thermal
Printing Speed
80mm/sec
Resolution
203 DPI X 203 DPI
Character
Font A (12X24), Font B (9X17)
Character per line
Font A : 32 columns , Font B : 42 columns
Character set
ALPHA NUMERIC Charactor, Extension grapic
Barcode
EAN-8, EAN-13, Code39, ITF, UPC-A,
Coda bar, Code93, Code128
Emulation
ESC/POS
Driver
Window CE 4.2 & 5.0, Window Mobile 5.0
Sensor
Paper End Sensor , Cover open Sensor
Paper
paper type
Thermal Paper
width
58mm
thickness
65
㎕
External Diameter
Max.
Φ
40mm
Internal Diameter
12.5mm +/-0.5mm
Reliability
TPH
50km
Battery
Continuous printing: 29min
Standby: 10hours 20min
Printing length: 130m
Communications
Serial(RS-232C), USB, Bluetooth Class2
MSR (Optional)
Card Standard
ISO7811/2, JIS
Track
1Track, 2Track, 3Track, JIS-II
Magnet Head Life
300,000 Passes(minimum)
Battery Charger
input
AC100~240V, 50/60 Hz
output
8.4V , 800~1400mA
Battery
Battery type
Li-ion
output
7.4V, 1130mAh
Charging time
2hours
Size
W X D X H(mm)
96 X 136 X 58
W X D X H”
3.7 X 5.3 X 2.2
Weight
0.4kg
Temperature
operation
-10 ~ 50
℃
storage
-20 ~ 60
℃
Humidity
operation
35 ~ 95%
5. Pritner Specification
5-1 Specification
FCC Information
This device complies with part 15 of the FCC Results. Operation is
subject to the following two conditions:
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for CLASS
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instuctions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try correct the interference by one or more of the
following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from
that to which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
NOTE