Glossary of Terms
Page
ii
Auto-Changeover:
A mode in which the thermostat will turn on the
heating or cooling based on room temperature demand.
Cool Setpoint:
The warmest temperature that the space should rise
to before cooling is turned on (without regard to deadband).
Deadband:
The number of degrees the thermostat will wait, once a
setpoint has been reached, before energizing heating or cooling.
Dehumidify:
To reduce the amount of moisture in the air.
Differential:
The forced temperature difference between the
heat set-
point
and the
cool setpoint
.
Heat Setpoint:
The coolest temperature that the space should drop
to before heating is turned on (without regard to deadband).
Humidify:
To increase the amount of moisture in the air.
Icon:
The word or symbol that appears on the thermostat display.
Mode:
The current operating condition of the thermostat (i.e. Off,
Heat, Cool, Auto, Program On).
Non-Programmable Thermostat:
A thermostat that does not have
the capability of running
Time Period Programming
.
Programmable Thermostat:
A thermostat that has the capability of
running
Time Period Programming
.
Reheat:
Running the cooling and 2nd stage strip heaters at the same
time in order to
dehumidify
the air without cooling down the room
temperature.
Temperature Swing:
Same as Deadband
.
Time Period Programming:
A program that allows the thermostat to
automatically adjust the
heat setpoint
and/or the
cool setpoint
based
on the time of the day.
Summary of Contents for S1-TBSU22HN
