4
Front/Rear Panel
IN
OUT
3
5
4
2
1
1. Power Switch
Use this switch to turn the Soundweb Contrio Server on and off.
2. BLU link Ports (BLU link Model Only)
These ports are available on the BLU link version of the Soundweb Contrio
Server only and allow for audio interfacing with other BLU link enabled audio
devices with up to 64 x 64 BLU link I/O channels.
3. Gigabit Network/Dante Ethernet Ports
Connect one of these ports to the network switch for communication with the
Soundweb London network. When using the Dante model, the
port is
also Dante enabled for interfacing with other Dante-enabled audio devices,
providing up to 64 x 64 Dante I/O channels. Note that the
port is not
Dante enabled.
NOTE:
Dante is enabled only on the Dante Soundweb Contrio Server model.
The BLU link model will not interface with Dante equipped devices using
this port.
4. IEC Power Inlet
Select the appropriate IEC power cable for the country of installation
(included) and connect it to this power inlet.
5. Power Cable Retaining Clip
Route the IEC power cable through this retaining clip for power cable
management.
Summary of Contents for Contrio
Page 1: ...Installation Guide ...
