2
Connect your Cypress Flowmeter(s).
• Insert flowmeter cord set/cable into strain relief/
cord grip (
A₁
) .
• Unplug flowmeter terminal block (
B₁
) from socket
(pluggable terminal blocks for easier wiring).
• Insert five flowmeter wires into terminals (
B₁
) according to
the color specified on the electronics board .
• Plug flowmeter terminal block back into socket
labeled Flowmeter .
• Repeat if using a second flowmeter (use
A₂
/
B₂
) .
• Remove excess wire slack and tighten strain relief nuts (
C
) .
1
Mount your Flow Computer
First you’ll mount the Flow Computer in any location that’s
convenient for monitoring ease . The Flow Computer can be
mounted near to your flowmeter(s) or thousands of feet away .
Remove faceplate by unscrewing the four corner screws on
the front .
Note:
the screws do not pull out of the faceplate;
they unscrew from the base and spin freely in the lid so you’ll
never lose them .
Insert fasteners into internal mounting holes .
Hole for screws is 1/4" diameter (screws not included) .
A₁
A₂
C
B₁
B₂
Installation
Installation
6
SoundWater Technologies, LLC
