system . With the
Output Mixer
you can control all incoming and outgoing signals.
Note:
The
Output Mixer
will only change the audible signal. You can output it
either through Ouput 1,2 and/or through the S/PDIF Output (setup under
Maste
r).
When you are recording an input signal, the
Output Mixer
does not change the
signal level. This ensures that you are always recording with best possible quality.
Master
Controls the output volume of the
Output Mixe
r. The signal controlled here will be
played through Output 1,2 and/or the S/PDIF Output.
You can control the the volume of the left and right channels independandly.
Muting the signal is possible as well.
With the buttons on the left side, you can hide or display each mixer channel.
- 21 -
In the lower right corner you can select the output routing for the analog output
channel 1/2 and the S/PDIF output:
