Soundtrack USA Titan-18P, User Manual

Page: 5 / 8

POWER
AUX LEVEL
AUX IN MIX OUT LINE IN
EQ
AUX IN
AC INPUT
AC110V 60Hz-T4A/250V
1
2
3
4
6
5
7
8
9
11
10
12
13
W115AL
1. MIC INPUT
Plug a mic directly into this port for public address usage and let
your voice be heard. (No phantom power)
2. RCA INPUT
Connect a CD player, digital media player, mixer, or other media
source to these inputs. Control the output volume using the Line
Input volume knob.
3. LINE INPUT(XLR)
Connect a line
-
level mixer or musrical instrument to this XLR
line
-
level input
.
Control the output volume using the Line Input
volume knob
.
Use this line
-
level input when linking together two
peaker units.
4. AUX VOLUME CONTROL
This knob is used to control volume of the AUX IN.
5. AUX INPUT
For 3.5" input or other mobile devices signal input.
6. MIX OUT
Connect this XLR output to another active (powered) speaker.
The level of the output is controlled by each channel’s volume
setting (Mic Input volume, Line Input volume, and Media Panel
volume)
7. MASTER VOLUME CONTROL
This control enables you to adjust the total volume level.
8. TREBLE CONTROL
This knob is used to regulate the amount treble applide to the
output signal.
9. BASS CONTROL
This knob is used to regulate the amount bass applied to the output signal.
10. Power LED
Indicates whether speaker is powered on or off.
11. CLIP LED
CLIP LED: This LED will flash red if the signal from inputs or Media Panel source is clipping. If this happens
decrease the setting of the Mic Input volume knob, Line Level volume knob, or Media Panel volume knob.
12. POWER SWITCH
This power switch turns on the system. Remember to adjust the volume level to the lowest setting before
turn on the power switch.
13. AC INPUT CONNECTOR
Connect the included power cord to the AC input connector before push on the power switch.