6
click on “Install SoundToys Native Effects” to start the process. Follow any
instructions included in the installer.
After the plug-ins have been installed, you’re ready to try out your new
toys. Yippeee! That was easy.
Download Version
When you purchase the download version of the SoundToys Native Effects,
you should have been instructed to download the SoundToys Native Effects
software installer from our web site. If you haven’t done so already, please
download it now.
You will have also received a SoundToys Native Effects iLok ‘asset’ from us,
deposited to your iLok.com account. This iLok asset is what we use to
unlock our plug-ins for awesome customers (like you! ) In order to use
SoundToys Native Effects plug-ins, you will need to transfer the SoundToys
Native Effects asset from your iLok.com account into your iLok hardware
key. If you haven’t already done this, go to
www.iLok.com
, and follow the
instructions on that web site for transferring the asset into your hardware
key.
Now, run the SoundToys Native Effects installer program. To check that
you are properly authorized launch your host application (or on the Mac,
the SoundToys Native Effects Authorizer application located in the
Applications:SoundToys folder). Your host should start up without any
dialogs asking you to
Authorize
.
Where We Put Everything
Once installed, the SoundToys Native Effects plug-ins will be installed in the
appropriate location for each plug-in format (VST, RTAS, AU). A complete
set of presets for each of the plug-ins will also be installed. Finally, a
SoundToys folder will be created which contains this manual, as well as
