Congratulations and thank you for purchasing Soundstream products. We are confi-
dent you will enjoy your new subwoofer and appreciate the effort involved in bringing
you the best engineered and crafted subwoofer in this category. Harmonic
indulgence...Listen and feel.
We advise you to keep this manual in a safe and dry place. Write down any important
information to reference from in the future, such as all of your enclosure information.
Draw a simple diagram and write all the parameters of the enclosure incase you ever
need to reference from it in the future.
The following enclosure recommendations are only a few in variation of what the
woofer requires. If you need specific information for a design and have questions
regarding it, please contact our Technical Support Department with your details, via
email at [email protected]. We strongly suggest you use or build an
enclosure with in the following parameters for proper function and quality results from
your woofer. Building an enclosure too far from the specified suggestions may cause
undesired performance and/or damage to your woofer and in some cases your
amplifier as well.
Specifications
NOTICE
* These numbers are measured with the cosmetic rubber gasket in place. Please measure the driver
yourself for precise dimensions or if necessary with out the gasket.
Sealed Enclosure Recommendations for XW-10 & 10/2
Optimum Enclosure
Other Enclosure Recommendations
MAX Power
Volume
Model
Mounting Depth
Outer Diameter
Cutout Diameter
Driver Displacement
Impedance
RMS Power
MAX Power
PEAK Power
Voice Coil
Magnet Weight
Frequency Response
Resonant Frequency
Qts
Qms
Qes
Vas
XMAX
SPL
XW-12 & 12/2
*5.125”
*12.625”
11.125“
.09 cu. ft.
Dual 4 ohm/Dual 2 ohm
150 watts
300 watts
600 watts
2”
40 oz.
30 - 500Hz
35.279Hz
.806
7.619
.902
52.208 ltr
9.35 mm
85.9 dB
XW-10 & 10/2
*4.5”
*10.375”
9”
.07 cu.ft.
Dual 4 ohm/Dual 2 ohm
125 watts
250 watts
500 watts
2”
40 oz
30 - 500Hz
38.469Hz
.736
8.514
.806
18.880 ltr
9.35 mm
83.1 dB
NET Volume
.9 cuft / 25.5 ltrs
Enclosure Q
.605
Max Power
250 watts
Fill
50%
Loose
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
NET Volume
1 cuft / 28.3 ltrs
Enclosure Q
.616
Max Power
250 watts
Fill
50%
Loose
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
Smallest .5 cuft / 14.16 ltrs
250 watts
Largest
1.4 cuft / 39.64 ltrs
200 watts
MAX Power
Volume
Smallest .7 cuft / 19.82 ltrs
250 watts
Largest
1.5 cuft / 42.48 ltrs
200 watts
Sealed Enclosure Recommendations for XW-12 & 12/2
Optimum Enclosure
Other Enclosure Recommendations
NET Volume
1.2 cuft / 34 ltrs
Vent Design
3” X 7.375”
Tuning Freq
40Hz
Max Power
250 watts
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
Vented Enclosure Recommendations for XW-10 & 10/2
Optimum Enclosure
Other Enclosure Recommendations
NET Volume
1.8 cuft / 51 ltrs
Vent Design
20 sqin X 14.5”
Tuning Freq
40Hz
Max Power
200 watts
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
NET Volume
1.5 cuft / 42.48 ltrs
Vent Design
4” X 12.25”
Tuning Freq
38Hz
Max Power
250 watts
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
Vented Enclosure Recommendations for XW-12 & 12/2
Optimum Enclosure
Other Enclosure Recommendations
NET Volume
2.25 cuft / 63.2 ltrs
Vent Design
20 sqin X 14”
Tuning Freq
36Hz
Max Power
225 watts
All volume suggestions are “Net Volume” before any
displacement. Please add accordingly to your design
Wiring Configurations
There are a variety of impedance possibilities when using woofers equipped with
multiple coils. It is “EXTREMELY” important that ALL coils are used and none are left as
spares. Always provide the minimum impedance your amplifier requires. If you need
assistance with wiring configurations, please consult a professional installer or
contact our Technical Support Department with your questions.
