We
premium parts to
masked gloss
circuit
capacitors,
RCA input/
And to insure
e,
we
incorporate switching power supply with High Current
circuit for timed
of
amplifiers.
CONNECTIONS
AND
CONTROLS
Rear
svx4
Power
connections, and
High level input
control.
Power
Red: Connect to
V dc.
Block: Connect to Chassis Ground.
Orange: Connect
unit remote turn-on.
Orange/Black
Out for amplifier
delay.
Input
Low Level: RCA
Left/Right IN for Front and
inputs.
High Level: Five-conductor plug-in terminal strip-G (ground),
FL (front-left), (front-right), RL (rear-left],
RR (rear-right) input
connections from high
source (e.g., factory
control:
potentiometer balancing incoming high
level
the low
system.
Hih Pass:
HIGH PASS OUT for Front
RCA
Left/Right SUB
(Front)
RCA
TWEETER
for Front.
RCA
MID
for Front.
High Pass: RCA jacks Left/Right HIGH PASS OUT
RCA jacks
SUB OUT.
RCA
Mono l/Mono 2
OUTPUTS.
Channel
output
control for
the stereo
the
HIGH PASS
FREQ:
to
Hz crossover frequency con-
trol for
high-pass
from the
HIGH PASS OUT
SUB: Slide
frequencies on or off with the rear
channel When SUB is Off
the fader
toward
when SUB is On
the front SUB switch
is Off, bass will track the
channel. For constant bass, both
[Front and
SUB switcher On.
Channel
LEVEL:
output
adjusting the
level from the SUB
Continuously-variable crossover frequency control stereo or
mono low-pars audio from the SUB OUT jocks. The
to
240 Hz,
when per octave
is selected. The white
stole, 53 209 Hz, applies when 24 per
filter is selected
12
Pushbutton for
slope of the
filter in the
channel. When the button is out, the slope is 12 per
SUB
is stereo, ond the
the aqua
when the button is in, slope is 24 per
is mono
(i.e.,
SUB
is mono signal), and the FREQ control
the white
Channel
SUB: Slide switch to track
frequencies (on or
with the
front
When SUB is Off,
will
you
the
the
When SUB is On
the
SUB
stitch is Off, the
will track front channel. For constant bars, set
both (Front and
SUB
to On.
slide
for setting front channel to either
or
TWEETER FREQ
2.4 5.6
for
high-pass audio from the Front TWEETER
OUT
This control is
when the
switch is in 3W
position.
TWEETER LEVEL (a
output level
for
adjusting
the
Front
TWEETER
CUT jocks.
is
only
when
is in
position.
SATELLITE/MID FREQ: When
set to
this control
continuously-variable,
to 500
Hz
crossover
3
