15
◆
AV-IN Mode(only for SDR-782T)
To start AV-IN Mode, tap on AV-IN button from main menu screen.
Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu
or by pressing repeat Mode button on the front panel.
Note: If there is no external video input, the TFT displays “NO SIGNAL”.
1. Press the / icon to a
△ ▽
djust TFT angle.
2. Press the
icon to be back to main menu.
◆
AUX-IN Mode(only for SDR-782)
To start AUX-IN Mode, tap on AUX-IN button from main menu screen.
Connect the external audio signal source to this unit. Select AUX-IN mode in the
main menu or by pressing Mode button repeatedly on the front panel.
Note: If there is no external audio input, the TFT displays “NO SIGNAL”.
1. Press the / icon to a
△ ▽
djust TFT angle.
2. Press the
icon to be back to main menu.
◆
Setting Control
Press SET button on the RC or SET icon on the main menu to go to setup pages.
1) Rotate Volume knob on the front panel or press up/down arrow on the RC to select any items
and then press VOL button on the front panel or ENTER button on the RC to confirm the item.
Press LEFT/RIGHT buttons on the RC to return to previous menu or enter the next menu.
2) Rotate Volume knob or press LEFT/RIGHT buttons on the RC to adjust the setting. Press VOL
button on the front panel or the ENTER button on the RC to confirm.
3
）
Press SET button on the RC or front panel again return to current mode.
Sound
EQ: select the digital sound effect.
Bass: bass up/down.
Treble: treble up/down.
Balance: Left/right Balance control.
Fader: Front/rear Fader control.
LONDNESS: Selecting loudness ON will
emphasize the low frequency output.
BEEP: Keypad sound setting.
