CONGRATULATIONS !
You now own a
Lil Wonder 4 Series
Amplifier, the product of an
uncompromising design and engineering philosophy. We suggest
you take a moment to document the information below, which will
be helpful in the event of theft or if service is needed. Please retain
this manual and your sales receipt for future reference.
SOUNDSTREAM amplifiers are the result of American innovation
and the highest quality control standards. When properly installed,
they will provide you with many years of listening pleasure. Should
your amplifier ever need service or replacement due to theft, Please
record your information on the following lines to refer to in the
event that you may need it later.
IMPORTANT INFORMATION
Serial# ___________________________
Dealer's Name______________________
Date of Purchase____________________
Installation Shop____________________
Installation Date ____________________
1
FEATURES
l
Hi-Fi performance(for L5.850).
l
Compact Size And Tiny Footprint.
l
Double Side PCB And SMT Components.
l
Full Mosfet Design.
l
LPF/HPF/BPF Crossover.
l
Adjustable BASSBOOST Frequency And Level(Except L5.850).
l
Active X-over Function.
l
Heavy-duty Aluminum Alloy Heatsink.
l
Overload, Overheat, High/low Voltage Protection.
l
ROHS Compliant.
Class-D + Class-AB Hybrid design,Best conbination of strong bass and
CONTROL FUNCTIONS
1. SPEAKERS
Connect speakers/subwoofers to these terminals. Be sure to check wire for proper
polarity. Never connect the speaker cables to chassis ground.
2. +12 Volt Power
Connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal
of the vehicle battery or the positive terminal of an isolated audio system battery.
Warning: Always protect this power cable by installing a fuse or circuit breaker of the
appropriate size within 18 inches (45cm) of the battery terminal connection.
3.Remote Turn On
This terminal turns on the amplifier when (+)12 volt is applied to it . Connect it to
the remote turn on lead of the head unit or signal source.
4.GND
Connect this cable directly to the frame of the vehicle. Make sure the metal frame
has been stripped of all paint down to the bare metal. Use the shortest distance
possible. It is always a good idea to replace the factory ground at this time with a larger
cable equal to the new amplifier power cable or larger. Connecting to the battery is the
best ground in the vehicle, but typically not practical to run ground that far.
2
