16
OPERATION MANUAL
soundscope pro-tect iHunt
cleaning
your
protectors
A brush may help to keep your protectors clean. Use the
brush after every day of use in order to remove debris and/or
other particles that may collect around the sound channel or
the battery compartment.
Brush carefully and wipe the shell with a soft and dry cloth.
Check the wax filter in the sound channel and when needed,
change. See separate leaflet for information about the wax
filter.
Never use any dissolving and/or cleaning liquids and/or
cleaning oils in cleaning the protectors. This product may be
adversely affected by certain chemical substances. Further
information should be sought from the manufacturer.
A good idea is to clean and change batteries over a table
with a soft underlay. This may stop the protectors being
damaged by falling against a hard surface.
avoid
dampness
The protectors may not be exposed to high temperatures,
dampness or water.
Remove the protectors when showering, bathing or when
using a hairdryer or hair spray.