7
ENGLISH
ZEPHIRO 2000ST HAZE User manual
1. Anti-Spill Tank
2. Liquid tank cap
3. Liquid hose with quick connector
4. Blue LCD Screen (2 Row X 8 Characters)
5. Control Panel (6 buttons)
6. DMX 5-Pin XLR Input
7. DMX 5-Pin XLR Output
8. Haze Output Deflector
9. Fuse
10. Power inlet Connector
11. DMX 3-Pin XLR Input
12. DMX 3-Pin XLR Output
5. SETTING UP
f
Place ZEPHIRO 2000ST HAZE on a flat surface and in a large area of at least 50 m²
of open space around the machine.
f
Keep it in horizontal position, do not tilt or flip. Before connecting this unit to
mains, fill in the tank with fluid. Always use water-based, non-toxic haze liquid
for further information) and check that Haze
Output Deflector is clean and unobstructed.
f
Before connecting to power, check whether mains voltage is suitable for the unit or
not.
f
The supplied power cable should be plugged into a grounded electrical outlet.
Once connected, the haze machine start heating and the LCD screen will show
“warming”
message to indicate that the device is in preparation to be used. This
process can take up to 1,5 minutes.
f
When the device is ready, the LCD screen will show
“Ready Haze”
message, and
after that it is possible to start making haze manually by holding down the
“MAN-
UAL” button
on the control panel.
f
To turn OFF the machine, unplug the unit from its power source
6. MAINS CONNECTIONS
Please note that power voltage and frequency are the same as the marked voltage and
frequency of device when connecting power. Wire correspondence is as follow:
Cable (EU)
Pin
International
Brown
Live
L
Blue
Neutral
N
