13
ENGLISH
ZEPHIRO 1000ST HAZE User manual
f
If the haze turns less, and the pump makes noise, switch off the unit immediately
and check fluid level, fuse, controller interface and power plug. If all of these are
normal, please connect power again. If problems still continue, please contact the
supplier.
f
When you shut down the machine, it is recommended that you remove any re-
maining fluid inside. Especially when the machine will not be used for a long time.
It is recommended that you open the tank, remove the fluid hose and place it next
to the tank in open air.
f
After use, let the haze machine cool down before transporting it by the handle.
Small bits of haze may still be emitted just after the machine is turned off. Let the
machine cool down for at least 20 minutes and only transport it when the housing
of the machine reaches a temperature that is comfortable enough to handle. Trans-
porting the machine while it is still hot may cause injuries and permanent damage
to the internal electronics and heating elements.
11. SPECIFICATIONS
Heating element
1000 Watt
Warm-up time
Approximately 1,5 Minutes
Tank capacity
2 Liters
Haze output
170m³/Min
Liquid consumption
200 Min/L (30%) - 120 Min/L (100%)
Control Panel
Yes (6 buttons with LCD display 2x8 Characters)
DMX connectivity
Yes (3/5 Pin )
DMX controls
Yes (2 Channel - fan speed, output volume )
Flight case
Yes (Included)
Power requirements
220V AC, 50Hz
Internal fuse
10A 250V fast blow 20mm glass
Dimensions
440x215x395 mm
Weight
12 Kg
Packing Size
475x245x420 mm
Packing Weight
13 Kg
