11
ENGLISH
YOUMIX SERIES User manual
MAIN OUT LEFT / MAIN OUT RIGHT outputs have female XLR plugs. They are used to
connect to active speakers, amplifiers, or PA systems as shown below.
MAIN OUT
LEFT
RIGHT
Passive
Speakers
Amplifier
Active
Speakers
5. REAR PANEL
OFF
POWER
PHANTOM
GND
AC IN
100-240V~
50/60Hz
ON
1
2 3
1)^IEC Socket
Plug power cord into an AC socket properly configured for your particular model
2)^POWER Switch
Press power switch to ON position to turn the system on, and to OFF position to turn it
off. When the MIxer is turned on, the green [POWER] LED on the front panel lights up.
3)^PHANTOM SWITCH
Youmix mixers can power condenser microphones that require a phantom voltage up
to + 48VDC. Pressing the [PHANTOM] switch to ON position, all mono channels with
XLR connector will be powered. When active, the red LED [PHANTOM] on front panel
is on. If you are not using microphones that require this phantom power, leave the
[PHANTOM] switch in OFF position (red LED is off).