soundsation Realkit-home, User Manual

Page: 13 / 60

13
ENGLISH
REALKIT-HOME User’s manual
13. SAVE Button: Save the record and setting.
14. +/- Buttons: It is universal in the kit, pattern selection and volume setting etc.
15. Pad Select Buttons: Select a pad in kit edit and display pad performance
in pattern playing.
RESET
2.2 BOTTOM PANEL
1. Power Switch: Turn On/Off the sound module
Note: After you turn the power off, do not turn it on immediately. Wait at least five
seconds so that the electronic circuits can be properly reset.
2. Power In Jack: Plug in the DC cable of the attached adaptor.
3. USB Jack: The USB connector allows you to connect the drum directly to your
computer’s USB port. The USB interface is compatible with Windows XP/Vista,
Windows 7 and MAC. The computer will recognize the drum as Audio Device.
4. Pad Trigger Connector: Each pad and Hi-Hat control pedal have labeled cables.
All cables are merged into a single connector. Plug the cable into the jack of the
corresponding component, and then plug in the connector here.
5. Headphone Jack: The drum has a stereo headphone jack. You can play in total
silence without disturbing others in the room by plugging a set of headphones into
the socket.
6. Line Out Jack: There is no built-in speaker in the drum. Line Out of stereo audio
output delivers the drum output signal to external amplification, such as home ste-
reo, PA system or other stand alone amplifiers. If you connect to an external mono
system, stereo/mono adapter is recommended.
7. Line In Jack: Line In of stereo audio input jacks will mix the supplied signal with
the internal drum sound. It can be used to connect to items such as CD players,
MP3
player etc.
Press and hold down both + and - button when turn
on the power until rES appears on the display. The
factory setting will be restored and recorded conten-
ts erased.