9
NEOMIX-102 / NEOMIX-202 / NEOMIX-202FX
POWER
Please do not connect microphones to the mixer (or the stagebox/wallbox) as long as the
phantom power supply in switched on. Connect the microphones before you switch on
the power supply. In addition, the monitor/PA loudspeakers should be muted before you
activate the phantom power supply. After switching on, wait approx. one minute in order
to allow system stabilization.
The blue POWER LED indicates that the console in powered on.
LEVEL INDICATOR
The high-precision 4-segment display accurately displays the relevant signal level.
2.4 Main section
The red +48V LED lights up when phantom power is turned on. Phantom power is required to operate
condenser microphones and is activates using the +48V switch located above the +48V LED.
+48 V
Fig. 2.4: Control elements of the main section
Caution! You must never use unbalanced XLR connectors (PIN 1 to 3 connected) on the
MIC input connectors if you want to use the phantom power supply.
MAIN SECTION
PHANTOM
L
R
20
MAIN MIX
0
6
CLIP
POWER
+
48 V
CD/TAPE
TO MIX
CD/TAPE
CD/TAPE
TO CTRL
AUX RETURN
PHONES/
CTRL ROOM
FX
+
15
- 8
0
+
20
- 8
0
MAX
- 8
