27
4
26-35
Gobo2
36-45
Gobo3
46-55
Gobo4
56-65
Gobo5
66-75
Gobo6
76-85
Gobo7
86-95
Gobo8
96-105
Gobo9
106-115 Gobo10
116-125 Gobo11
126-135 Gobo12
136-145 Gobo1 shaking ( slow-fast)
146-155 Gobo2 shaking ( slow-fast)
156-165 Gobo3 shaking ( slow-fast)
166-175 Gobo4 shaking ( slow-fast)
176-185 Gobo5 shaking ( slow-fast)
186-195 Gobo6 shaking ( slow-fast)
196-205 Gobo7 shaking ( slow-fast)
206-215 Gobo8 shaking ( slow-fast)
216-225 Gobo9 shaking ( slow-fast)
226-235 Gobo10 shaking ( slow-fast)
236-245 Gobo11 shaking ( slow-fast)
246-255 Gobo12 shaking ( slow-fast)
l
Protection against electrical shock
Connection must be made to a power supply system fitted
with efficient earthling (Class I appliance according to
standard EN 60598-1).
It is, moreover, recommended to protect the supply lines of
the projectors from indirect contact and / or shorting to
earth by using appropriately sized residual current devices.
l
Connection to mains supply
Connection to the electricity mains must be carried out by a
qualified electrical installer.
Check that the mains frequency and voltage correspond to
those for which the projector is designed as given on the
electrical date label.
This label also gives the input power to which you need to
refer to evaluate the maximum number of fittings to
connect to the electricity line, in order to avoid
overloading.
l
Lamp
The fitting mounts a high-pressure lamp that needs an
external igniter is fitted onto the apparatus.
-Carefully read the “operating instruction” provided by the
lamp manufacturer.
-Immediately replace the lamp if damaged or deformed by
heat.