8
ENGLISH
MBL-5-18W-6IN1 User manual
8.
- Test
Press MENU button to
, press ENTER button, the led display will strobe, the
light will run built in program, press MENU to back to main menu.
9.
- Working time
Press MENU button to
, press ENTER button, the led display could show the
working time, press MENU back to main menu.
10.
- Program version
Press MENU button to
, press ENTER button, the led display will show the pro-
gram version, press MENU back to main menu.
4. How to operate
1. Master/slave mode to control.
2. DMX controller
4.1. Master/slave mode
Connect the lights in series, the first light control the other light in auto show, sound
control show, and so on. It’s very good for the instant show mode. Must set the first
light to be master light
. If there are no DMX signal, the master mode LED will
light up, the sound control LED will strobe according to the music, the other lights will
not work in slave mode.
: it lets you to choose
(Normal) or
(two
light show) mode. When connect the DMX cable, the slave LED will light up.
4.2. Two Light mode
For the slave light, slave 1 (
) running same as the master light; slave 2 (
) running against the master light. If there are just two lights, you could set the second
light as slave light (
) for better show.
4.3. DMX Controller
If control by DMX controller, then you need to set the address code to control the light,
the address code value is 1-512, the light could receive the signal accordingly.
Press MENU button, select
menu, press ENTER button, address will strobe.
Use UP /DOWN to select DMX512 address. After address ensure, press ENTER but-
ton until address stop strobe. After 8 seconds will return the menu. If return the former
but not change, press the menu button.
