18
ENGLISH
K2u User manual
8.8. Metronome
Pressing the [METRONOME], button as shown in the pic
-
ture to the right, turns ON the metronome .
POINT METRONOME
SPLIT
After activating the metronome, you will be able to hear
the sound effect of the selected option. The Down Beat is
shown in the beats display area. The flashing of the sym
-
bols in the beats area will remain active until the metro
-
nome is deactivated.
By repeatedly pressing the [METRONOME] button, you can select the desired time si-
gnature or turn off the Metronome. The selectable time signature values are as follows:
1/4, 2/4, 3/4, 4/4, OFF
The message “Beat” appears in the character area of the display and a value from 1 to
4 in the numeric display area. Once the [METRONOME] button is released, the main
screen will be displayed after about 3 seconds.
NOTICE:
If a style is started with the [START / STOP] button, the metronome will
automatically be turned OFF.
8.9. Split Point
As already explained in paragraph 7.3 Lower function, the keyboard is divided into two
parts in order to have one sound for the right hand and another for the left hand at the
same time. The split point is at note C4 (key 25).
The split point relating to the Lower function can be changed in the range from C3 to
C6 (Keys 13 to 49).
To set the split point, press and hold the [SPLIT POINT]
button as shown in the figure to the right. The writing
“SpltPt”
appears in the character area of the display and
a value from 13 to 49 in the numerical display area.
POINT METRONOME
SPLIT
Then press a key on the keyboard in the range from C3 to C6 (Keys 13 to 49).
The new split point value will be shown in the numeric display area of the display. Once
the key has been released, the main screen will be displayed after about 3 seconds.
NOTES:
1)
During the Split Point setting the keyboard doesn’t emit any sound.
2)
The Split Point setting has effect only for the Lower function.
3)
The Split Point for the automatic accompaniments is set to note C4 (Key 25) and
can’t be changed.
